Skip to content

Tips & Guide

RSS
  • July 22, 2022

    Applying Water Slide Decals

    Authored by: Bryan Lee - Mechamind One of the best ways to enhance your model kit is by applying Water Slide Decals. In this article, I will be sharing the basic method of applying water decal to your model kit....

    Read now
  • June 19, 2022

    Plastic Nipper / Cutter Maintenance

    Authored by: Bryan Lee - Mechamind It is recommended to do periodic maintenance for your hobby tools to extend the lifespan of their usage and in this article I will share how to maintain your Plastic Nipper / Cutter For...

    Read now
  • June 11, 2022

    Removing Nub Marks

    Authored by: Bryan Lee - Mechamind Often when parts are removed from the runner, nub marks will be left behind. Sanding the nub marks is the most common way to remove them and in this article I will be sharing...

    Read now
  • June 3, 2022

    Cutting Plastic Parts from Runner

    Authored by: Bryan Lee - Mechamind The very first step to building a plastic model kit is to cut out the plastic parts from the runner. The recommended way to do it is to use a proper cutter/nipper designed for...

    Read now
  • May 29, 2022

    Panel Lining using Mr Hobby

    Authored by: Bryan Lee - Mechamind Usually of the first few steps to customizing your Gunpla or Plastic Model Kit is to fill up the panel lines with color, commonly referred to as Panel Lining. This is not meant to...

    Read now
  • May 19, 2022

    Airbrush Troubleshooting Guide

    Authored by: Bryan Lee - Mechamind Sometimes, you will find that your airbrush is not spraying properly or no paint is coming out of the airbrush at all / clogged. In this article, I will share some tips on how...

    Read now